Home / Illinois / Chicago / Canela Cutting Tools available from General Cutting Tools

Canela Cutting Tools available from General Cutting Tools

Canela cutting tools are available from Cutting Tools Chicago aka General Cutting Tools in Chicago Illinois.  We ship to all of Illinois, Iowa, Indiana, Wisconsin, Michigan, Minnesota and the rest of the US.

KM 15

Finishing grade in the K10 range. This carbide grade is for use on cast iron, aluminium and heat-resistant alloys. This grade works well on cobalt based alloys and synthetic materials and is suitable for finishing on heat-resistant alloys.

PM 25

General purpose uncoated grade in the P30 range.

This tough, economical grade is suitable to work carbon steels, alloyed steels, tool steels and stainless steels.

PM25 provides toughness and resistance to deformation in roughing and semi-finishing applications.

PM 40

Roughing grade in the P35 range. This tough grade is for structural, cast and tool steels. It is recommended when toughness is more important than wear resistance.

NC 25

NC 25 is a newly developed Cermet applicable for a wide range of cutting conditions as a standard grade for general machining of steel. It can successfully be

used for a range of cutting speeds from (100 to 200 m/min) with better wear resistance than conventional TiC Cermet. It gives an excellent performance from semi-finish to finish operation of ductile cast iron at cutting speeds of 200 m/min. or less.

NC 40

NC 40 is a newly developed Cermet applicable for a wide range of cutting conditions as a standard grade for general machining of steel. It can successfully be used for a range of cutting speeds from (100 to 200 m/min) with better wear resistance than conventional TiC Cermet. It gives an excellent performance from semi-finish to finish operation of ductile cast iron at cutting speeds of 200 m/min. or less.

TIN 16

Wear resistant finishing to intermediate grade suitable for many applications on steel, cast iron, stainless steel and high temperature alloys. It is generally used at higher speeds where deformation may be a problem. The multi-layer coating includes TiCN and aluminium oxide.

TIN 17

Coated TiAIN grade in the K20 range. This carbide grade is for use on cast iron, aluminium and heat-resistant alloys. This grade works well on cobalt

based alloys and synthetic materials and is suitable for finishing on heat-resistant alloys.

TIN 22

General purpose wear resistant grade. It has enriched substrate which has exceptionally good deformation as well as fracture resistance. The multi-layer coating includes aluminium oxide to add additional heat and wear resistance.

It is used to machine steel and stainless steel at lower speeds than TIN 16.

TIN 32

General purpose wear resistance turning grade. The multi-layer coating includes aluminium oxide to add additional heat and wear resistance. It is used to machine steel at lower speeds than TIN 16. This turning grade is for demanding metal removal operations, including cutting through scale at low speeds through heavy interruption, and problem machining of stainless steel at low speed and poor rigidity.

TIN 35

New coated grade developed to machine stainless steel and heat-resistance alloys. This grade is only used in combination with the CS chipbreaker. First choice for stainless steel applications.

ZR 10

Micrograin grade with a extremely hard single zirconium layer for machining aluminium, copper alloys and plastics.

TC30

Tough grade for milling in steel, stainless steel and superalloys. Smooth coating to minimize re-cutting of chips when milling in sticky materials. Excellent grade for tough demanding applications with or without coolant.

Ti (C, N).

TIN 21

Carbide coated grade with Tin-MT TiCN-Al203 by CVD. For use on steel and cast iron. With it’s aluminium oxide coating, the grade TIN 21 is recommended every time wear characteristics are more important than toughness.

TIN 25

Coated with TiN-TiC-TiN. Coating thickness 3-5 microns for use on steel, alloyed steel and stainless steel, with or without coolant with coolant, TIN 25 performs well when milling titanium or nickel based alloys, and ductile iron,

TL20

Carbide coated with TiAIN and lubricity layer PVD coating. It has a lower friction coefficient and a lower cutting energy during finishing. The sharper cutting edge reduces the built-up edge damage and gives the workpiece an excellent surface finish. Recommended for alloyed steel.

TL40

PVD-coated grade for fine to medium rough milling. First choice for milling with small feeds and/or low cutting speeds. Excellent for milling when there is a risk of vibrations and when coolant is used. Recommended for machining superalloys.

Multilayer (TiAI)N.

ZR 10

Micrograin grade with a extremely hard single zirconium layer for machining aluminium, copper alloys and plastics.

Check Also

Onsrud MaxQ End Mill

Onsrud Cutting Tool Distributor in Chicago, Illinois. Designed for Maximum Speeds and Feed Rates while …